GUK's Leaflet Folders - FA 21/ FA 35 Cartonac

For mounting on board binding machines, packaging lines and cartoning machines.

Thousands of systems successfully in use

The leaflets are separated from below a stack magazine, withdrawn and folded.

On systems with permanently installed suction nozzles, problems may occur if the paper stack is curved slightly. The outer corners are not caught and this results in infeed malfunctions. In order to counteract these problems, we have developed a feeder with moveable suction nozzles. The drawn-in drums which move the leaflet into the folding mechanism are also moveable.

With the attachment of a second station another 2 or 4 pocket folding device can be used and is synchronously powered by a toothed belt.

Technical Features :
  • Completely maintenance free
  • Low noise drive by toothed belts
  • Leaflets are taken from the bottom
  • Adjustable suction nozzles
  • Incorporated solenoid valve
  • 4 folding pockets, 3 deflectors
  • Station II with 2 or 4 folding pockets attached to Station I and synchronous powered

    Plain format : max. 21 x 32 cm min.
    6 x 6.8 cm max.
    35 x 32 cm min.
    6 x 6.8 cm
    Smallest fold : 15 mm  
    Throughput : up to 400/min
    Drive : via chain or toothed belt, 1:1 by the boadr-binding machine - also available with own drive
    Floor area required : 21 x 30 cm

    Formpak (Pty) Ltd
    P O Box 2101, Primrose, 1416, Republic of South Africa
    Tel : +27 11 828 8870/1/2/3     Fax : +27 11 828 8880